June 21 - 27, 2020: Issue 455

 

A Job For Life: Apprentice Carpenter + Commencement Tool List

Johnson Brothers Mitre 10 Trade Centre in their Mona Vale store

Around now some of our school leavers may be considering what options they wish to explore as not everyone wants to go to university. With this in mind we'll alternate DIY Projects in the DIY Idea pages with information on what's out there and what help you can get to set yourself up in a career that interests you. You won't have to get your haircut BUT you will secure a real job in an industry that interests you and on getting your ticket will have autonomy for life. All you have to do is follow through and complete the study and work entailed. 

Worth noting is the NSW Government is investing an additional $285 million over six years to fund the qualification fees for 100,000 new apprentices from July 1st 2018. This saves you from having to pay up to $2,000 for training costs per apprentice. (Please note this is for apprentices only, not trainees) Find out more about Fee Free Apprenticeships at:  www.tafensw.edu.au/fee-free-apprenticeships

There are also a range of other help, support and incentives for those who want to do this through a traineeship for those over 21 with fee caps there too.

To start off with, one for those who like working with wood.

CERTIFICATE III IN CARPENTRY
National Course Code: CPC30211

Become a highly sought-after carpenter when you undertake the nationally accredited Certificate III in Carpentry. Study as an apprentice or get recognised for your industry experience in this practical, hands-on course. Carpenters and joiners are in high demand in a skills shortage industry.

TAFE NSW code: CPC30211-01V03-20NBC-477 ; Location – Northern Beaches, Main Campus (Apprenticeship) - visit: www.tafensw.edu.au/CPC30211-01V03-20NBC-477/Certificate-III-in-Carpentry

Entry Requirements

When you study with TAFE NSW, they want you to succeed. Entry requirements allow them to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

TRAINING PACKAGE REQUIREMENTS

If you are enrolling as an apprentice, you will need to provide evidence of the following:

  • Your employment as an apprentice carpenter
  • A completed training contract signed by your employer

Achievement of the general induction training program (commonly known as a White Card). The unit CPCCWHS1001 Prepare to work safely in the construction industry covers this requirement as specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007). You will need this before you can enter a construction worksite

TAFE NSW REQUIREMENTS

TAFE NSW offers the Certificate III in Carpentry as an apprenticeship or non-apprenticeship course so you can nail the career you want. Depending on your unique circumstances - and the campus you choose to study at - you will need to provide evidence that you meet any relevant entry criteria.

Apprenticeship

To be eligible for this course, you must:

  • Be employed as an apprentice carpenter
  • Submit your training plan proposal (TPP) with your application
  • Complete your formal training with TAFE NSW and your informal, on-the-job training with your employer

Non-apprenticeship

You will need to:

  • Be over 21 years of age
  • Provide evidence of significant (3 years plus) and current industry experience. Your workplace evidence will be reviewed prior to course entry to make sure your skills and knowledge meet course requirements

If your workplace evidence does not meet all units of competency, you will need to organise an approved workplace or simulated workplace for practical assessments.

ADDITIONAL REQUIREMENTS

With 130 locations across the state, TAFE NSW tailors qualifications to meet the needs of the local community and specific student groups (like apprentices, fast-tracked and online students). To make sure this course is the right fit for you, we will need you to demonstrate that you can meet the additional requirements below.

LICENSING REQUIREMENTS

This is a licensed occupation. When you successfully complete the Certificate III in Carpentry you can apply for licensing with NSW Fair Trading. Fair Trading NSW is the licensing and regulatory authority for trades and contractor authorities in NSW. Further information can be found on their website.

BE PREPARED

To be prepared for this course, it is recommended that you have:

  • A strong work ethic
  • A good understanding of mathematics is preferable
  • An interest in working in a variety of environments, indoors and outdoors
  • An interest in working on building and construction projects

If you need support in preparation for study, contact TAFE about your options.

To be enrolled in this course, you need to be able to provide evidence that you are:

  • an apprentice (you will work in industry and study at the same time)
  • employed full time
  • signed up with an Apprentice Network Provider and have a Training Plan Proposal
  • seeking to gain skills and knowledge to become a qualified Carpenter after successful completion

Achievement of unit CPCCWHS1001 covers the requirement for the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007), commonly known as White Card.

To successfully complete this course, you will need:

  • Successfully complete all of the units of competency including providing evidence from your employer to support the achievement of competency against every unit.
  • Work evidence is required to be collected by the apprentice to support the teaching and assessment and determination of competency for each unit in this course.

First Qualification Fee

Applies to a student who does not already hold a post-school qualification from any tertiary sector (TAFE, private provider or University), and includes any vocational (certificates, Diplomas, Advanced Diplomas) and higher education (degree) qualifications achieved in Australia or overseas previously.

Subsequent Qualification Fee

Applies to a student who already holds one or more post-school qualifications from any tertiary sector (TAFE, private provider or University), and includes any vocational (certificates, Diplomas, Advanced Diplomas) and higher education (degree) qualifications achieved in Australia or overseas previously.

Apprenticeship Fee

Eligible apprentices are exempt from fees when undertaking an apprenticeship under the NSW Government's Fee Free Apprenticeship. For apprentices who are not eligible, apprenticeship qualification fees are capped at $2,000. For more information visit the TAFE Fee Free Apprenticeships page.

Traineeship Fee

Applies to a student undertaking a traineeship qualification under a traineeship pathway, with fees are capped at $1,000. For more information visit the Apprenticeships and Traineeships page.

Concession Fees

Applies to eligible disadvantaged students who receive a specified Commonwealth Government welfare benefit or allowance. Concession fees are discounted, with flat fees applied across a qualification level.

For more information on concessions and exemptions, visit the Smart and Skilled Fee Exemption and Concessions page on the Smart and Skilled website.

For more information on Smart and Skilled funding, visit the Smart and Skilled page.

Construction and Building Trades

  • Certificate III in Bricklaying/Blocklaying (CPC30111)
  • Certificate III in Carpentry (CPC30211)
  • Certificate III in Carpentry and Joinery (CPC32011)
  • Certificate III in Cabinet Making (Furniture) (MSF31113)
  • Certificate III in Cabinet Making (Kitchens and Bathrooms) (MSF31113)
  • Certificate III in Painting and Decorating (CPC30611)
  • Certificate III in Plumbing (CPC32413)
  • Certificate III in Roof Plumbing (CPC32612)

What Is An Apprenticeship?

Apprenticeships offer you the best of work and study. You train on the job, study and earn an income all while working towards becoming a qualified tradesperson.

What is a traineeship?

Traineeships are similar to apprenticeships but they concentrate on vocational or job areas such as office administration, information technology or hospitality.

How long does it take?

An apprenticeship normally takes three to four years in traditional trade areas like carpentry, electrical, hairdressing and plumbing. Three to four years may seem like a long time, but remember you're working towards become fully qualified and getting hands-on experience, and you get paid for it. How long does it take?

A traineeship lasts one to two years. You'll learn, work and earn and when you successfully complete you will receive (at a minimum) a Certificate II qualification.

Who can become an Apprentice?

  • Apprenticeships are open to anyone of working age i.e. 14 years and 9 months.
  • You don't need a school certificate or any other qualification.
  • Year 10, 11 and 12 students, school leavers, people re-entering the workforce or professionals.

Who can become a Trainee?

  • Traineeships are open to anyone of working age i.e. 14 years and 9 months.
  • You don't need a school certificate or any other qualification.
  • Year 10, 11 and 12 students, school leavers, people re-entering the workforce or professionals.

What's in it for you?

  • Paid employment under an appropriate industrial arrangement.
  • A training agreement between the employer and apprentice or trainee, which is registered with the NSW Department of industry.
  • Structured on-the-job training delivered by TAFE NSW.
  • A nationally recognised qualification.
  • Get a head start in your chosen career.
  • Study full-time or part-time or while still at school.

What is a School Based Apprenticeship or Traineeship?

School based apprenticeships and traineeships combine paid work, training and school. They are available to all Year 10, 11 and 12 high school students and you can work towards a nationally recognised qualification as part of your HSC and in some cases they could count towards your ATAR.

What's in it for you?

  • You'll get hands on industry experience, a qualification from TAFE NSW and your HSC.
  • You'll be paid while you learn.
  • Once you've completed a school based apprenticeship you can potentially commence in the second year of an apprenticeship when you leave school.

Pre-Apprenticeship courses

TAFE NSW offers a range of pre-apprenticeship courses in skills shortage areas, such as carpentry and automotive trades. These courses help you get into an apprenticeship faster and when you complete you’ll be able to finish your Certificate III apprenticeship qualification in less time.

TAFE can also teach you basic skills to help you get a traineeship. For example, they offer a range of computer courses to help equip you with the basic computer skills that employers expect.

How To Invest In An Apprentice Or Trainee If You Are An Employer

  • You can find an Australian Apprentice through:
  • Apprenticeship Network Provider
  • Jobactive
  • TAFE Enterprise, who will assist and guide you throughout the apprenticeship or traineeship
  • Recruiting someone you know

Important Resources

Australian Apprenticeships - information regarding Australian Apprenticeships including programs, employer incentives, support for apprentices, advice for people looking to start an apprenticeship.

The Australian Apprenticeship Support Network – provides help with recruitment, training and retaining Apprentices.

TAFE Enterprise – for customised training that meets the challenges of the future, think TAFE Enterprise

How To Become A Carpenter

For many who work in Building and Construction, the goal is to become fully qualified carpenters. 

  • Enrol and complete a Certificate III in Carpentry
  • Find an employer to complete your apprenticeship with
  • Complete a Certificate IV or Diploma in Building and Construction
  • Apply for your Builders Registration/Licence through your state regulation body

Put simply, a carpentry apprenticeship combines on-the-job training with a skilled professional, alongside structured learning with a registered provider – such as TAFE NSW. To become an apprentice carpenter, you’ll need to undertake a course such as the CPC30211 Certificate III in Carpentry. This certificate will lay the foundations for your career, giving you the knowledge, carpentry skills, and technical training needed to carry out everyday carpentry tasks and processes, while teaching you how to use a range of industry standard tools and equipment.

Careers In Construction

When you become an apprentice carpenter, you’re setting yourself up for a solid career in the building and construction industry. The workforce is constantly evolving, with new opportunities opening up all the time across a range of areas.

In New South Wales alone, more than 40,000 homes are built each year - while overall throughout Australia around 500 thousand people move into a new home. This means the demand for qualified carpenters is strong and isn't going away. Looking ahead, you’ll have plenty of opportunities to apply your carpentry skills and make a real impact on society.

In terms of your career progression, where you go is in your hands. You might continue working for your employer, tackling bigger and better projects. Or, you might decide to take a leap and start your own small business.

When it comes to furthering your education, carpenter apprentices should start looking into other building and construction courses. As a graduate of the CPC30211 Certificate III in Carpentry, you’ll be eligible to enrol in the CPC40110 Certificate IV in Building and Construction (Building).

Armed with this qualification, you’ll have the carpentry skills and knowledge needed to become a licensed builder, start your own business, or work towards employment in more supervisory roles.

From here, you can take it up a level and enrol in the CPC50210 Diploma of Building and Construction (Building). With a diploma under your belt, you could pursue a career as a project supervisor, building manager, job site supervisor, estimator, project manager or foreperson.

What Do Carpenter Apprentices Do?

The Carpenter Apprentice position is the most common and productive way for a person to become a carpenter. Carpenter Apprentices work very closely with carpenters to develop and master their craft until they can call themselves a carpenter as opposed to apprentice. 

The specifications for a Carpenter Apprentice varies. When and where they work depends on whom they are working with and learning from. A major industry in which they are employed is construction. However, there are other industries in which carpentry plays a role. An apprentice may work and learn from one sole individual, or they may do it in a corporate environment. He or she spend a lot of time in shops, but they may also spend a lot of time outside doing things such as construction. Some Carpenter Apprentices learn to build buildings, others learn to build things such as furniture. The apprentice's work hours vary, but it tends to range between times that it is light out. 

Carpenter Apprentice Tasks

  • Assist with and observe carpenters to learn how to start, check, and finish carpentry projects.
  • Frame and set up for large-scale projects, including scaffolding and mixing and pouring cement.
  • Read blueprints and determine materials needs, checking inventory for supplies.
  • Measure, cut, sand, paint, and finish wood.

The more you learn the more you earn in this industry. Skills in Tools, Problem Solving and Residential are correlated to pay that is above average. Visit: https://www.payscale.com/research/AU/Job=Carpenter_Apprentice/Hourly_Rate

Tools For The Job

Starting out an apprenticeship means you will want to invest in some basic tools you will need. You don't need to buy them all at once and many of those you do need can be applied as Tax Concessions, along with items such as your required clothing (proper steel-capped boots for example) - even sunscreen can be claimed - so keep those receipts and look out for end of financial year sales such as the Tax Time Tool Blitz currently happening at Johnson Brothers Mitre 10 and buy those needs on sale!

Here is the list for basics that will help you through the first year:

1: Tape Measure: The motto in carpentry is 'measure thrice, check twice and cut once' - so you will need one of these. Buy one somewhere in the range of 5 to 10 metres for the building industry.

2: Spirit Level: Levels must be perfect in the building trade, so an accurate spirit level is a must. Spend a little extra and purchase an extra rugged model to withstand life around the worksite- tools get dropped all the time so you need one that will go the distance.

3: Utility Knife and Blades: Cutting open packets and boxes, trimming soft materials, marking and scoring - you’ll need this for everything.

4: Screwdriver Set: Invest in a good selection of Philips and flat head sizes, because there’ll always be a screw that needs adjusting somewhere.

5: Marking Pencils and Chalk: Create marks that won’t ruin the end project and are easy to remove if necessary. You’ll also need to mark straight lines for all sorts of jobs, which leads to the next item.

6: Builders Square: This L shaped tool helps you get everything perfectly square, gives you a straight edge to mark with, and includes measurements along its length. Invest in a large and a small one to cover every task

7: Claw Hammer: Hammering on one side, and pulling nails on the other. The first hammer a carpenter should have, and very useful for any trade.

8: Linesman Pliers: A solid pair of linesman pliers is great for gripping, pulling, twisting, and cutting wire or small nails. 

9: Power Drill: New battery powered drills will go all day. Make sure you purchase an extra battery and have one charged at all times - although many of these have packages where you will get those extra batteries. If it’s likely you’ll drill concrete or masonry; purchase a drill with a hammer action or attachment.

10: Tool Box or Bag: You need somewhere to store all of this. For this basic kit, a small toolbox or carry bag is ideal if you want all your tools handy by your side. Over time you will add plenty of tools to this list; but we guarantee you’ll reach for these essential tools every day you’re on the job.

Making Them Last: How To Look After Your Tools

Cleaning Your Tools

If you allow dust and other contaminants to build up in your tools then over time they may impact the moving parts and cause failure. Tools are expensive and you want them to last more than a few years. A bit of regular maintenance and proper storage will ensure yours 'go the distance'. It's also important to hold on to your sales dockets and warranties so that if it breaks you can get a replacement. But yourself a folder and keep all those slips of paper there.

To clean your tools:

  • Wipe off any oil or grease that gets onto your tools at the end of every job and before storage.
  • Periodically clean out any vents, exhausts or other little crevices with a cotton bud on power tools, when you start buying those.
  • Use a compressor and air gun, or a can of compressed air to blow out dirt and dust from inside your tools.
  • For tools with integrated filters, be sure to replace them as recommended in the owner’s manual.

Check Your Tools For Damage And Wear

It pays to periodically check your tools for damage and wear to prevent injury or further damage.

  • Pay attention to the power cords, and if you see that they are cut, frayed or have exposed wires then do not use the tool until you have had the cord repaired.
  • Check the prongs on your plugs to ensure that they are straight, and free from corrosion.
  • Check that your tools don’t emit any smoke or excess heat when using them
  • Be sure to stop using a tool if it starts to give off an odd smell.

Store Your Tools Properly

Keep your tools protected from dust, moisture and other adverse conditions by storing them properly after use.

Keep them in their original cases if possible, or tuck them away in storage drawers or tool chests, preferably in a garage or basement with a moderately controlled climate. This not only protects them, it also keeps them organised so you can easily find the tool you need when you need it.

Keep a moisture absorbing sachet in your toolbox with your power tools.

Remember to keep instruction manuals for all of your tools. They are provided to you by the manufacturer so that you can safely and competently operate your tools. They’ll also have valuable information on how to care for the tool, find replacement parts and other important pieces of information. Store manuals either in a toolbox drawer or a cabinet in your workspace/storage area so that they are readily available.

We hope these lists of a few simple things you can do to ensure that your career in Carpentry tools last for many years to come.

Johnson Brothers Mitre 10 Update: Shop Online Or Phone Ahead

Intending to keep our customers and staff safe, we present some additional ways for both our retail and trade customers to do business with us.

Trade and Retail Pick Up

Express Pick up Mona Vale

- Call Johnson Bros Mitre 10 Mona Vale, and we will pick & pack your order and have it ready for you to pick up in 2 hours. (Stocked Lines Only)

- Drive into our undercover Trade Drive-Thru area at 73 Bassett St Mona Vale, and your order will be ready for pick-up.

- Our team members will help you with your load and finalise payment/paperwork

Express Pick up Avalon

- Call Johnson Bros Mitre 10 Avalon, and we will pick & pack your order and have it ready for you to pick up in 2 hours. (Stocked Lines Only)

- Drive into our back lane off Bellevue Avenue, and your order will be ready for pick-up.

- Our team members will help you with your load and finalise payment/paperwork

Online Retail Stores Go Live

We’ve launched two eCommerce sites offering 2hr pick up in-store and flat rate delivery options on the northern beaches*.

Jbhmv.com.au (Mona Vale)

Jbhav.com.au (Avalon)

With the ability to leave the product on your doorstep, this provides an option of an entirely contactless transaction.

*Flat rate delivery is not available to trade sales, building supplies and trade quantities

** The stock availability is updated nightly, which may mean the stock is unavailable when the order is placed

Trade Delivery to Site

Maybe not new, but certainly worth a mention again!

We can get almost anything delivered quickly onto site!

As always ring the trade desk direct on 9999 0333 and let them know what you need!

Final Thought

Like everyone, we have found ourselves in a new and uncertain environment, but we’re setting up (and digging in) for the long haul!

We want to acknowledge that the decision to retain over 120 staff and meet any future challenges head-on, could not have happened without the continued support you provide us as customers.

Thank you and stay safe,

The Johnson Family


Tax Time Tool Blitz 2020
On Sale Until June 30, 2020 - Catalogue Available Online



Mirabella 5W LED Solar Flood Light With Motion Sensor: $29.00
Bright solar light. Illuminate outdoors areas without wiring. Adjustable wall mount.

 

DeWALT 18-54V 6.0Ah FlexVolt XR Li-Ion Brushless 3 Piece Combo Kit: $1,029.00
3 Piece Brushless combo kit. Backward-compatible with your existing XR power tool. Kit includes: Hammer Drill Driver. Impact Driver. 184mm (7") Circular Saw. 2 x 6.0Ah FlexVolt Battery. Fast Charger. T-Stak box. Bonus via redemption 18V Battery Pack.



Makita 18V 5.0Ah Brushless Combo Kit - 5 Piece: $1,449.00
Includes:  18V Brushless Hammer Driver Drill. 18V Brushless Impact Driver. 18V Brushless Planer. 18V 165mm Brushless Circular Saw. 18V Brushless Reciprocating Saw.  18V Fast Charger.   2 x 18V 5.0Ah Battery with Gauge. Carry bag. Bonus via redemption 2 x 5AH Batteries.


Rockwell 1200W Wet & Dry Vacuum: $99.00
20L tank. Stainless steel. Power take off. 4m cord. Carry handle & blower function. RD6602


Geelong Saw Horse Pair: $29.00
900W x 560D x 710Hmm

Green Life Garden Centre at Johnson Brothers Mona Vale has a great stock of seedlings, native and other plants and all you need to get gardening in brilliant Autumn weather

Johnson Brothers Mitre 10 Trade Centre at Mona Vale - everything you need under one roof.


Johnson Brothers Mitre 10 New Store
73 Bassett Street
Mona Vale - Online Store: Jbhmv.Com.Au

Products advice is available from the trained friendly staff at Narrabeen, Mona Vale and Avalon Johnson Brothers Mitre 10. 

Click on logo to visit Johnson Brothers Mitre 10 website

Johnson Bros Mitre 10 - Avalon            (02) 9918 3315

Johnson Bros Mitre 10 - Mona Vale     (02) 9999 3340

JBH Timber & Building Supplies          (02) 9999 0333

JBH Fencing & Landscape Supplies    (02) 9970 6333

www.johnsonbros.com.au Online store: jbhmv.com.au

Previous DIY Pages:

Decking Timbers  Caring For Your Deck Decking Finishes  Privacy Screens I Privacy Screens II  Privacy Screening Hardwoods  Autumn Paths and Lawns  Insulation Batts Plasterboard  Ventilation - Edmond's Ecofan Blackboards for Children and Home Spring Lawn Care  Shade Sails & Watering  Basic DIY Tools DIY Tools - Power Drills Recycle Your Trampoline into An Air Bed  How to Build Your Own Backyard Cricket Pitch Christmas Lights Displays around House and Garden Summer Mildew - Refresh, Renew How to Fix Things That Drip and Bump in the Night Time To Plant Winter Vegetables in  a Raised Garden Beds Layout Organsing Your Tool Shed  Make Your Own Weathervane Installing A Garden Watering System  Decking Oils  How To Make Garden Compost  How To Winter proof Your Lawn  How to create Shabby Chic effect on Timber Furniture How to Build Your Own Raised Garden Bed  Growing Your Own Winter Vegies  Winter Heating Guide  Prepare Your Yard For Winter Eradicating Noxious Weeds From Your Yard How to Fix Furniture Finishes Part I  How to Repair Scratches, Dings, and Dents of Furniture Surfaces - Part II Winter Draughts Fix  Classic Wooden Tool Carrier Spring Garden Checklist Part I  Install Your Own Skylight  Retaining Walls for Saving Soil and New Spring Garden Beds  Summer Salad Garden  Native Plant Garden for A Fairy Arbour Renewing Short Flight of Exterior Stairs Deck Maintenance DIY Summer Tasks You Can Do In Time to Get to the Beach  Garden Ponds for Attracting Birdlife, Dragonflies and for the Soothing Sounds of Water  Salt Air: Maintenance and Protection Creating an Outdoor Dining Arbour, Gazebo or Patio - Part I Creating an Outdor Dining Arbour, Gazebo or Patio Part II  Autumn Garden Tasks  Autumn DIY Jobs: Waterproof Your Home Checklist  Dealing With Dampness Inside the Home  Fixing Your Fence  Repairing and Replacing Damaged Decking boards  DIY Toy Box and Snow Globes: School Holidays Fun - Winter 2015  DIY Wooden Toy Cars and Perfect Painted Flowerpots: School Holiday Fun - Winter 2015  Shoring Up an Under House Earth Bank – Installing a Basic Retaining Wall  DIY One Shelf Sideboard  Early Spring 2015 Garden Care Salad Garden For Children  Keeping Your Garden and Home Cool in Hot Weather  Classic Beach Garden and Camping Chairs 3 Portable Versions Anyone Can Make DIY Outdoor Furniture Mark I: Park Benches for Your Garden Make Your Own Scooter or Skateboard: Summer 2016 Fun  How to Install a Solid Core Door and Door Furniture  Summer Garden Jobs: Pruning A Hedge  How to Make A Swing Chair - With A Frame for Garden Setting  Garden Jobs for March to Make A Beautiful and Healthy Spring  Keeping Outdoor Nooks Warm During Cooler Months  Children’s Step Stool with Storage  Stop Winter Rain Lawn Loss and Soil Erosion on Slopes  DIY Garden Shed: Part 1 of 4 - Base  DIY Garden Shed: Part 2 - Framing Walls  DIY Garden Shed: Part 2b - Gable Roof Framing  Garden Shed Part 3: Roof Installation  DIY Garden Shed: Weather- boards - Door And Window Installation And Paint Finish DIY Coffee Table With Chessboard Inlay  Spring Gardening: Feeding Your Soil And Plants - What Works For Each Plant  DIY Sandstone Flagging Parking Area - Platform  DIY Pre-Summer Checklist For A Safe Home   Summer Spruce Up: Interior Paint Tips and Three easy steps to rejuvenate your timber deck The Perfect BBQ Garden Setting DIY Water Wise Garden   DIY Side Gates  DIY Storm Preparation And Home Protection  One To Two Day DIY Weekend Spruce Ups  Vegepods For Autumn Planting + Easy To Make Lego Table Or Student Desk That Can Be Dismantled + Johnson Brothers Mitre 10 Online Store   Johnson Brothers Mitre 10 Great New Mona Vale Store: Still In Bassett Street - number 73  Johnson Brothers Mitre 10 New Mona Vale Store: The Greenlife Garden Centre  Go Outside And Play: Creating Garden Spaces To Connect Children With Nature DIY Plasterboard Repair DIY Dolls House Or Garage Or Boatshed  DIY Child's Waggon - or use as a large planter mover DIY Bathroom Refresh: Zing For Spring  Tips for Growing a Native Garden FireCrunch, Australian Developed Fire-proof, Sustainable, Durable and Reliable Building Board Now Available at Johnson Bros. at Mona Vale and Narrabeen School Holidays DIY Ideas for Children: Little Vegetables Garden, Swing, Windchimes Bushfire Season Preparation 2017: Home and Outdoor Areas  Johnson Brothers Mitre 10 Trade Centre at Mona Vale + Issue No 1 of Mitre 10’s inSITE Magazine for Tradies and Handymen  Preparing Al Fresco Areas for Christmas Get-Togethers and Summer Visitors  Summer De-bug; Mosquitoes, flies, cockroaches and ants - how to keep the outdoors insects where they belong DIY Summer Projects: Install A Fountain Or Water Feature  Late Summer and Early Autumn Projects: A Shed For All Storage Solutions + Garden Tasks + Keeping Our Waterways Clean   Autumn Plantings for Winter Harvests   2018   Paintback Collection Event: Johnson Bros Mitre 10 Mona Vale Saturday, April 7  Reducing Ticks in Your Garden: Garden care, Plants that Repel, What to Wear Outdoors Attracting Insectivore Birds to Your Garden: DIY Natural Tick Control  Mother's Day 2018: DIY Rose Garden Winter Mould & Mildew Inside Your home: How to Keep Air and Surfaces Healthier DIY Traditional Rocking Horse  Johnson Brothers Trade Day 2018 DIY Mushrooms and Vege Kits: School Holidays Fun Winter 2018 for Curious Kids  Woodworking Projects for Beginners: School Holidays Fun Winter 2018 - Simple Storage Box + Wood Tool Box Spring Garden Prep: Soil Care  Spring into Spring + JBH August 2018 Trifecta  DIY Backyard Doggie Paradise  Garden Care for Heavy Rain Days + Non-Toxic Snail and Slug Debug Ideas  Garden Design and Plant Management to Minimise Tick Attacks and Infestations - insights from an essay by Bill Conroy BSc. (Agr) (Syd) + a Tribute to Wilfred Lawrence Conroy CBE by Keith Jackson, PNG and others  Make Your Own BBQ Kitchen Garden: Gifts That Grow Past That Giving Day  Christmas Lights 2018: Light Up the Night  How to Keep Your House Cool During a Heatwave Without Using an Air-Conditioner Mid-Summer Garden Care  2018 Winners Of National Hardware Store Of The Year - Johnson Bros Mitre 10 Mona Vale! + End Of Summer Garden To Do List  DIY Fruits of Your Garden: Growing Figs  Fruits Of Your Garden: Growing Passionfruit - Autumn Is Also The Time To Plant Strawberries For Spring  How To Water Your Plants When Away On Holidays + Some April 2019 School Holidays Fun For Outdoors; A Skateboard Swing Or Indoors; Grow Or Make Pot Plant People Dealing With Autumn Dampness Inside The Home + Mums Day Gifts For 2019 Winter Heating Guide + Get Ready For Winter Specials  Keeping Your Garden Dewful During Times Of Water Restrictions and Drought  Installing Leaf Stopper Gutter Guard + Trade Day 2019  JBH Mitre 10 Trade Day Guests 2019  An Artfull Garden - for Winter School Holidays 2019 DIY Deck Refurbishment: Turning Wood Into Open Tiled Spaces - Groundworks  Father's Day Wish List 2019 + How to Re-stain your Deck timbers and posts for Summer  Installing Posts For Decks and Verandahs With Heavier Loads + Installing Membranes For Tiled Decks National Garden Week's 2019 Focus Is On Children(Oct 13-19): Spring School Holiday 2019 Garden Ideas (to get started on)  Replacing Balustrades Handrails  DIY Tiling Your Verandah: and Choosing Your Simple Or Complex Tile Pattern  Reduce Bushfire Risk To Older Homes + Preparing Your Yard For Bushfires  Time to Put Up those Christmas Lights and Deck your Gum Trees with rows of Jolly!  NSW RFS Bushfire Survival Plan 2020 + Reduce Bushfire Risk To Homes + Johnson Brothers Mitre 10 Great Water Saving Ideas during Level 2 water restrictions + some  'Don't Sweat Summer'  Specials The Inaugural Sydney Edible Garden Trail - Learn how to help your garden survive the heat, drought, and water restrictions  DIY Flyscreens  DIY Privacy Screen In 2 Hours  Family Hardware Store Wins Best In Australia  Autumn DIY Jobs: Exterior Jobs to Keep Everything Dry and Cosy Inside the Home  Autumn Vegepod Garden: Plant Now to Stay Healthy: JBH Response to COVID-19 Restrictions - We're Adapting!  Autumn Holidays Projects: Let's Go Fly A Kite + Some handy Painting Tips for Interiors and Sprucing up that Outside Deck - Easter Hours 2020  Pittwater's Noxious Weeds: A Great Time To Get Outdoors and Pull Them Out and Replace With Native Plants  Blooming Lovely: Late Autumn Planting For Gardens Full Of Colour, Cheer + Great Food For The Table  Dealing With Dampness Inside The Home - June 2020

______________________

John and Bob Johnson - The Johnson Brothers Profile  John William Alfred Johnson - The Eulogies for those who could not attend Mass

Australia's Prime Minister Visits Mackellar - Informal Afternoon Tea with Hon. Malcolm Turnbull October 2016

JBH Win Awards August 2018 Trifecta - 2018 Free Trade Day supporters, Mitre 10 Heritage Advert features JBH Mona Vale Store, Hardware Australia’s 2018 NSW Hardware Store of the Year over 2500sqm.

Front Page Issue 294: 2018 Winners Of National Hardware Store Of The Year - Johnson Bros Mitre 10 Mona Vale !!!

National Garden Week's 2019 Focus Is On Children(Oct 13-19): School Holiday Garden Ideas (to get started on) & Congratulations Award Winning Johnson Brothers Mitre10 At Mona Vale - 2019 NSW Store Of the Year2019 NSW Trade Centre Of the Year and 2019 Village Garden Centre of the Year

Johnson Bros Mitre 10 were awarded as the best Trade Store in the country: February 2020

Family Hardware Store Wins Best In Australia: Johnson Bros Mitre 10 Mona Vale Crowned ‘National Trade Store Of The Year’ - Celebrating 65th Year in 2020

Anzac Day In Pittwater 2020: Candles, Crosses and Online Commemorative Services: Johnson Brothers Family Donates 20 Thousand Candles to Community Light Up The Dawn Initiativ

Front Page Issue 447ANZAC DAY 2020

Important 
All information and tips in this publication are of a general nature only and neither Johnson Brothers Mitre 10 or Pittwater Online News does not warrant the accuracy or completeness of the information and tips in this publication. This publication is not intended to be a substitute for expert advice. Johnson Brothers Mitre 10 advises you to always consult an experienced and qualified person when undertaking jobs of this kind (including consulting a qualified tradesperson such as an electrician or plumber where relevant expert services are required). 

You should also consider any safety precautions that may be necessary when undertaking the work described in this publication (including wearing any necessary safety equipment such as safety glasses, goggles or ear protectors or hard hats). The information and tips in this publication are provided on the basis that Johnson Brothers Mitre 10 and Pittwater Online News excludes all liability for any loss or damage which is suffered or incurred (including, but not limited to, indirect and consequential loss or damage and whether or not such loss or damage could have been foreseen) for any personal injury or damage to property whatsoever resulting from the use of the information and tips in this publication. 

Pittwater Online News and Johnson Brothers Mitre 10 also advises there may be laws, regulations or by-laws with which you must comply when undertaking the work described in this publication. You should obtain all necessary permissions and permits from council and/or any other relevant statutory body or authority before carrying out any work. Major projects published in this publication always list these and/orlinks to where you may research what your own project requires to meet regulations.